SMART LightRaise 60wi Remote Control
$19.99
The SMART LightRaise 60wi remote control replacement controls power, input selection, volume, and display modes for this interactive DLP projector (part number 03-00131-20).
50 in stock
About This Remote
Power, input selection, volume, display modes, and muting are all back in hand with this replacement remote control for the SMART LightRaise 60wi. The LightRaise 60wi is a short-throw interactive DLP projector rated at 2500 ANSI lumens with a native 1280×800 (WXGA) resolution and a 0.36:1 throw ratio, built around a 0.65″ single-chip DLP engine with BrilliantColor technology and dual 10W integrated speakers. Its part number is the 03-00131-20, and it works over infrared with no programming, code entry, or pairing required. It uses the same key placement and command set as the remote supplied with the projector. It uses two AAA batteries.
Why buy this remote
- Uses the same key placement and command set for the SMART LightRaise 60wi projector without any learning curve.
- Works without any programming or code entry, covering all standard projector controls immediately.
- Controls input switching across HDMI, VGA, Composite Video, and other connected sources on the LightRaise 60wi.
- Includes volume and muting commands that work with the projector’s dual 10W integrated speakers directly.
Compatible part numbers
SMART LightRaise 60wi Specifications
| Native Resolution | 1280×800 (WXGA) |
|---|---|
| Aspect Ratio | 16:10 |
| Brightness | 2500 ANSI lumens |
| Contrast Ratio | 3400:1 |
| Display Technology | Single chip 0.65" DLP with BrilliantColor technology |
| Throw Ratio | 0.36:1 |
| Lamp Life (Standard) | 2500 hours |
| Lamp Life (Economic) | 3500 hours |
| Audio | Dual 10W integrated speakers |
| Connectivity | HDMI, VGA, Composite Video, RJ-45, RS-232, USB Type-A/B, Microphone/Audio mini-jacks |
| Interactive Technology | Dual-touch computer vision tracking (finger and two infrared pens) |
| Software | SMART Notebook collaborative learning software |
Frequently asked questions
Will this SMART LightRaise 60wi remote work without any setup?
Yes. The remote control works and requires no programming, code entry, or pairing. Insert two AAA batteries and it is ready to use.
What functions does this replacement cover on the LightRaise 60wi?
This remote covers power, input selection, volume, muting, and display mode controls. It uses the same key placement and command set as the remote supplied with the projector.
What part number does this replacement carry?
The replacement is sold under part number 03-00131-20, which is the part number for the LightRaise 60wi remote control.
Which input sources can I switch between using this remote?
The LightRaise 60wi accepts HDMI, VGA, Composite Video, RJ-45, RS-232, USB Type-A/B, and Microphone/Audio mini-jack connections. This remote includes the input-selection commands to switch among those sources.
What type of batteries does this remote use?
Two AAA batteries are required.
Is this replacement compatible with the dual-touch interactive features of the LightRaise 60wi?
The LightRaise 60wi's dual-touch computer vision tracking, which supports finger touch and two infrared pens, operates independently of the remote. This remote handles the projector's standard controls such as power, input, and volume.
| Compatible Brand | SMART |
|---|---|
| Device Type | |
| Compatible Model | LightRaise 60wi |
| Power Source | 2 x AAA |
📦 Shipping Information
At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free — the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.
🚚 How much does shipping cost?
Shipping is free on every order — always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.
🏢 Where do you ship from?
Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas — it ships domestically and arrives quickly.
⏱️ When will my order ship?
We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.
Business days are Monday through Friday, excluding national holidays.
🚀 How long will it take to arrive?
Once your order leaves our warehouse, most deliveries arrive within 2–4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.
Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.
⚡ Do you offer faster (expedited) shipping?
We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2–3 business days at no extra cost.
If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.
📬 Which carriers do you use?
Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) — usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.
🌎 Do you ship internationally?
Yes — we ship internationally. International orders typically arrive within 8–14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.
Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.
🏝️ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?
Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2–4 business days.
📮 Do you deliver to PO Boxes?
Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.
🔍 How do I track my order?
As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.
📧 Why does my order say “Completed”?
When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading — “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.
📭 My tracking number isn’t updating — what should I do?
It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend — carriers don’t scan a package at every stop. If there’s no movement for more than 3–4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.
📦 My tracking says “Delivered” but I don’t have it
If the carrier marked your package delivered but it’s not in your hands:
- Check around your home — porch, mailbox, side door, garage, or wherever packages usually land.
- Ask household members or neighbors in case someone brought it in for you.
- Wait 24 hours — packages are sometimes scanned as delivered slightly before they actually arrive.
If it still hasn’t turned up:
- Contact your local USPS office — they can pull GPS delivery confirmation showing exactly where the package was scanned.
- Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.
Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.
💔 My remote arrived damaged or doesn’t work
Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.
🏠 What if I entered the wrong address?
If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.
🔀 Why did my order arrive in separate packages?
If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.
❄️ Holiday & weather delays
Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods — and once a package is with the carrier, those delays are outside our control.
✅ Our commitment to you
Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.
📞 Still have questions?
We’re happy to help.
- Email: cs@usaremotes.com
- Phone: (720) 204-8889
- We typically reply within one business day.

Reviews
There are no reviews yet.