Ricoh PJ X3340N Projector Remote Control

$23.99

Ricoh PJ X3340N remote replacement controls input selection, focus, display modes, and navigation on this XGA DLP projector (part number R102).

38 in stock

SKU: RIC-PJX3340N Categories: , ,
Description

About This Remote

This replacement remote puts every function of the Ricoh PJ X3340N projector back under direct control: input switching, focus adjustment, display modes, menu navigation, and the mouse remote control feature built into this XGA DLP model. The PJ X3340N is a portable, network-enabled conference-room projector rated at 3,000 ANSI lumens with a 5,000:1 contrast ratio, and this remote covers the full button layout, putting the everyday controls right where your thumb expects them. It works over infrared with no programming, code entry, or pairing required. Two AAA batteries power it.

Why buy this remote

  • Covers input selection, display modes, menu navigation, and the PJ X3340N mouse remote control feature.
  • Works without programming or code entry, so setup takes no extra steps.
  • Puts the everyday controls right where your thumb expects them for the Ricoh PJ X3340N projector.
  • Controls the full function set of a 3,000-lumen XGA DLP conference-room projector.

Compatible part numbers

Ricoh PJ X3340N Remote Specifications
Part numberR102
Device TypeProjector
CompatibilityRicoh PJ X3340N Projector
Warranty1 year

Ricoh PJ X3340N Projector Specifications

Display Technology Single Chip DLP (0.55")
Native Resolution XGA (1024×768 pixels)
Brightness 3,000 ANSI Lumens (standard mode)
Contrast Ratio 5,000:1
Aspect Ratio 4:3 (native)
Lamp Life Up to 3,500 hours (standard), up to 5,000 hours (Eco mode)
Networking RJ45 Ethernet port for monitoring/administration
Connectivity HDMI, Component (VGA), S-Video, Composite Video, USB 2.0, Audio In/Out
Special Features 3D Capability, Auto Focus Sensor, Mouse Remote Control functionality
Weight 6.2 lbs

Frequently asked questions

Will this remote control work with the Ricoh PJ X3340N without any programming?

Yes. The Ricoh PJ X3340N remote control is an infrared replacement that responds to the projector immediately, with no code entry, pairing, or programming steps involved.

What is the part number for this replacement?

This remote is listed under part number R102. That is the manufacturer part number for this replacement, and it is the correct code to reference when confirming compatibility with the PJ X3340N.

What batteries does this remote use?

This remote takes 2 AAA batteries.

What resolution and brightness does the Ricoh PJ X3340N support?

The PJ X3340N is a single-chip DLP projector with XGA native resolution (1024×768 pixels) and 3,000 ANSI lumens brightness in standard mode. This remote controls all display and image settings on that model.

Does the PJ X3340N have a networking port, and does this remote support any network-related functions?

The PJ X3340N includes an RJ45 Ethernet port for monitoring and administration. This remote controls the projector's on-screen menu, where network settings are accessed, so you can reach those functions directly.

Additional information
Compatible BrandRicoh
Device TypeProjector
Compatible ModelPJ X3340N
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ricoh PJ X3340N Projector Remote Control”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

📦 Shipping Information

At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free — the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.


🚚 How much does shipping cost?

Shipping is free on every order — always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.


🏢 Where do you ship from?

Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas — it ships domestically and arrives quickly.


⏱️ When will my order ship?

We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.

Business days are Monday through Friday, excluding national holidays.


🚀 How long will it take to arrive?

Once your order leaves our warehouse, most deliveries arrive within 2–4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.

Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.


⚡ Do you offer faster (expedited) shipping?

We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2–3 business days at no extra cost.

If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.


📬 Which carriers do you use?

Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) — usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.


🌎 Do you ship internationally?

Yes — we ship internationally. International orders typically arrive within 8–14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.

Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.


🏝️ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?

Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2–4 business days.


📮 Do you deliver to PO Boxes?

Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.


🔍 How do I track my order?

As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.


📧 Why does my order say “Completed”?

When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading — “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.


📭 My tracking number isn’t updating — what should I do?

It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend — carriers don’t scan a package at every stop. If there’s no movement for more than 3–4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.


📦 My tracking says “Delivered” but I don’t have it

If the carrier marked your package delivered but it’s not in your hands:

  1. Check around your home — porch, mailbox, side door, garage, or wherever packages usually land.
  2. Ask household members or neighbors in case someone brought it in for you.
  3. Wait 24 hours — packages are sometimes scanned as delivered slightly before they actually arrive.

If it still hasn’t turned up:

  • Contact your local USPS office — they can pull GPS delivery confirmation showing exactly where the package was scanned.
  • Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.

Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.


💔 My remote arrived damaged or doesn’t work

Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.


🏠 What if I entered the wrong address?

If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.


🔀 Why did my order arrive in separate packages?

If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.


❄️ Holiday & weather delays

Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods — and once a package is with the carrier, those delays are outside our control.


✅ Our commitment to you

Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.


📞 Still have questions?

We’re happy to help.

  • Email: cs@usaremotes.com
  • Phone: (720) 204-8889
  • We typically reply within one business day.