Pioneer VSX-1123-K AV Receiver Remote Control
$25.99
Pioneer VSX-1123-K remote replacement manages input switching, zone control, and audio processing for this 7.2-channel AV receiver (part number AXD7596).
30 in stock
About This Remote
Input selection, zone assignment, MCACC calibration access, and streaming source control all come back with this Pioneer VSX-1123-K remote. The VSX-1123-K is a 7.2-channel network AV receiver from 2013, rated at 90 watts per channel into 8 ohms, and this replacement lays out the day-to-day controls in the familiar places, covering all eight HDMI inputs, both HDMI outputs, and the two audio zones the receiver supports. It works over infrared with no programming, code entry, or pairing required. Runs on 2 x AAA batteries.
Why buy this remote
- Covers all eight HDMI inputs and both HDMI outputs on the VSX-1123-K receiver.
- Controls zone switching across the receiver’s two audio zones and two HDMI zones.
- Lays out the day-to-day controls in the familiar places so daily use stays intuitive.
- Works without programming or code entry, so setup takes no extra steps.
- Includes access to MCACC room calibration and network streaming source controls.
Compatible part numbers
Pioneer VSX-1123-K AV Receiver Specifications
| Channels | 7.2-channel |
|---|---|
| Power Output (8 ohms) | 90 watts per channel (20 Hz, 20 kHz, 0.08% THD) |
| Power Output (6 ohms) | 165 watts per channel |
| HDMI Inputs | 8 |
| HDMI Outputs | 2 |
| HDMI Features | 3D, 4K Upscaling/Pass-through, Audio Return Channel, MHL 2.0 |
| Networking/Streaming | DLNA 1.5, Apple AirPlay, HTC Connect, Pandora, Internet Radio (vTuner) |
| Audio Processing | MCACC Room Calibration, 192 kHz / 24-bit DAC |
| Audio Decoding | Dolby TrueHD, DTS-HD Master Audio |
| Zone Support | Two HDMI zones, two Audio zones (Zones 2 and 3) |
| Amplifier Class | A/B |
| Front Ports | HDMI/MHL, USB, Headphone, MCACC Mic |
Frequently asked questions
Will this remote work with my Pioneer VSX-1123-K AV receiver without any setup?
Yes. The Pioneer VSX-1123-K remote control works immediately with no programming, code entry, or pairing required. Point it at the receiver and it responds.
What part number does this replacement carry?
This replacement carries part number AXD7596, which is the designated replacement remote for the VSX-1123-K.
Does this remote control the zone outputs on the VSX-1123-K?
Yes. The VSX-1123-K supports two HDMI zones and two audio zones (Zones 2 and 3), and this remote includes the controls needed to manage all of them.
Can I use this remote to access MCACC room calibration on the receiver?
Yes. MCACC access is part of the button layout on this remote, matching the controls built into the VSX-1123-K.
What batteries does this remote use?
It takes 2 x AAA batteries.
Does this remote support the VSX-1123-K's network streaming features?
Yes. The VSX-1123-K includes AirPlay, DLNA 1.5, Pandora, and Internet Radio (vTuner) support, and this remote provides the navigation and source controls those features require.
| Compatible Brand | Pioneer |
|---|---|
| Device Type | AV Receiver |
| Compatible Model | VSX-1123-K |
| Power Source | 2 x AAA |
📦 Shipping Information
At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free — the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.
🚚 How much does shipping cost?
Shipping is free on every order — always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.
🏢 Where do you ship from?
Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas — it ships domestically and arrives quickly.
⏱️ When will my order ship?
We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.
Business days are Monday through Friday, excluding national holidays.
🚀 How long will it take to arrive?
Once your order leaves our warehouse, most deliveries arrive within 2–4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.
Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.
⚡ Do you offer faster (expedited) shipping?
We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2–3 business days at no extra cost.
If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.
📬 Which carriers do you use?
Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) — usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.
🌎 Do you ship internationally?
Yes — we ship internationally. International orders typically arrive within 8–14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.
Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.
🏝️ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?
Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2–4 business days.
📮 Do you deliver to PO Boxes?
Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.
🔍 How do I track my order?
As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.
📧 Why does my order say “Completed”?
When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading — “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.
📭 My tracking number isn’t updating — what should I do?
It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend — carriers don’t scan a package at every stop. If there’s no movement for more than 3–4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.
📦 My tracking says “Delivered” but I don’t have it
If the carrier marked your package delivered but it’s not in your hands:
- Check around your home — porch, mailbox, side door, garage, or wherever packages usually land.
- Ask household members or neighbors in case someone brought it in for you.
- Wait 24 hours — packages are sometimes scanned as delivered slightly before they actually arrive.
If it still hasn’t turned up:
- Contact your local USPS office — they can pull GPS delivery confirmation showing exactly where the package was scanned.
- Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.
Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.
💔 My remote arrived damaged or doesn’t work
Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.
🏠 What if I entered the wrong address?
If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.
🔀 Why did my order arrive in separate packages?
If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.
❄️ Holiday & weather delays
Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods — and once a package is with the carrier, those delays are outside our control.
✅ Our commitment to you
Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.
📞 Still have questions?
We’re happy to help.
- Email: cs@usaremotes.com
- Phone: (720) 204-8889
- We typically reply within one business day.

Reviews
There are no reviews yet.