BenQ MS502 Projector Remote
$21.99
Nothing to program, pair, or configure, the BenQ MS502 remote works straight out of the box, restoring power, input and source switching, menu and settings navigation, volume, and the full projector key set to your BenQ projector the moment it arrives.
15 in stock
About This Remote
The BenQ MS502 remote covers the control set BenQ projector owners rely on daily: power on and off, input and source selection, menu and settings access, full directional navigation, volume adjustment, and the dedicated projector keys built into the original button layout. Point it at your projector and it works, no programming, no pairing, and nothing to configure. That is the out-of-the-box experience this replacement is designed to deliver.
On the compatibility side, the MS502 is the correct replacement for a wide range of BenQ projector families, including the MX503, MX813ST, MX815ST, MW817ST, MS504, MS510, MS517, MS524, and MS521P series, with the full list available in the Compatible Device Models section on this page. Whether your projector sits in a classroom, a boardroom, or a home setup, this remote slots in as the working replacement without any extra steps.
The remote runs on 2 x AAA batteries. Everything else is already taken care of, commands, button placement, and device compatibility all match what the original remote provided.
Why buy this remote
- A correct-fit replacement that matches the original button layout and command set for these BenQ projector families.
- Covers power, input switching, menu navigation, volume, and dedicated projector keys, the full working control set.
- Works the moment it arrives, no programming, pairing, or configuration required.
- A straightforward, no-fuss swap that gets your projector back under full control right away.
Compatible Device Models
This remote works with the BenQ models listed below.
Frequently asked questions
Is this the right remote if my original BenQ projector remote stopped working?
Yes, provided your projector is in the compatible family. The MS502 is a direct replacement built to match the original command set and button layout, so it operates your projector exactly as the remote it replaces did, nothing to set up, nothing to learn.
Which BenQ projector models does this remote fit?
The MS502 is compatible with projectors in the MX503, MX813ST, MX815ST, MX816ST, MW817ST, MS504, MS510, and more families, among others. See the full compatibility list in the Compatible Device Models section on this page.
How many BenQ projectors does this remote support?
The MS502 fits 10+ BenQ projector models. The complete list is in the Compatible Device Models section on this page.
Will the buttons match my old remote?
The MS502 is designed to replicate the original button layout, including the input and source keys, menu and navigation controls, volume adjustment, and the dedicated projector keys, so the transition from your old remote should feel immediate and familiar.
Is this a genuine BenQ remote?
The MS502 is a direct replacement remote. It matches the original's button layout and command set, so it operates your BenQ projector exactly as the remote it replaces did, nothing to program, nothing to pair, and no learning required.
Do I need to do anything to make it work with my projector?
No setup is needed. Point the remote at your projector and it works straight away, no codes to enter and no menus to navigate before you can start using it.
| Compatible Brand | BenQ |
|---|---|
| Device Type | Projector |
| Connectivity | Infrared (IR) |
| Compatible Part Number | MS502 |
๐ฆ Shipping Information
At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free โ the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.
๐ How much does shipping cost?
Shipping is free on every order โ always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.
๐ข Where do you ship from?
Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas โ it ships domestically and arrives quickly.
โฑ๏ธ When will my order ship?
We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.
Business days are Monday through Friday, excluding national holidays.
๐ How long will it take to arrive?
Once your order leaves our warehouse, most deliveries arrive within 2โ4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.
Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.
โก Do you offer faster (expedited) shipping?
We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2โ3 business days at no extra cost.
If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.
๐ฌ Which carriers do you use?
Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) โ usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.
๐ Do you ship internationally?
Yes โ we ship internationally. International orders typically arrive within 8โ14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.
Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.
๐๏ธ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?
Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2โ4 business days.
๐ฎ Do you deliver to PO Boxes?
Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.
๐ How do I track my order?
As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.
๐ง Why does my order say “Completed”?
When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading โ “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.
๐ญ My tracking number isn’t updating โ what should I do?
It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend โ carriers don’t scan a package at every stop. If there’s no movement for more than 3โ4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.
๐ฆ My tracking says “Delivered” but I don’t have it
If the carrier marked your package delivered but it’s not in your hands:
- Check around your home โ porch, mailbox, side door, garage, or wherever packages usually land.
- Ask household members or neighbors in case someone brought it in for you.
- Wait 24 hours โ packages are sometimes scanned as delivered slightly before they actually arrive.
If it still hasn’t turned up:
- Contact your local USPS office โ they can pull GPS delivery confirmation showing exactly where the package was scanned.
- Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.
Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.
๐ My remote arrived damaged or doesn’t work
Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.
๐ What if I entered the wrong address?
If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.
๐ Why did my order arrive in separate packages?
If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.
โ๏ธ Holiday & weather delays
Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods โ and once a package is with the carrier, those delays are outside our control.
โ Our commitment to you
Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.
๐ Still have questions?
We’re happy to help.
- Email: cs@usaremotes.com
- Phone: (720) 204-8889
- We typically reply within one business day.
Related products
BenQ 5J.JH106.001 Projector Remote
BenQ HT4050 W3000 Projector Remote Control Replacement
The BenQ HT4050 remote replacement restores power, input selection, picture mode, menu navigation, and playback transport control, so you can manage every aspect of your projector exactly the way you always have, no programming, no pairing, just a fresh remote that fits the job from the moment you pick it up.

Reviews
There are no reviews yet.