Emerson ST6000F1N Am/fm Stereo Tuner Replacement Remote

$25.99

Emerson ST6000F1N remote replacement covers station tuning, preset recall, and display control for this AM/FM stereo tuner (part number RC6000ST).

49 in stock

SKU: EM-ST6000F1N Categories: ,
Description

About This Remote

Station tuning, preset recall, display dimming, and signal strength reading are the daily controls an Emerson ST6000F1N owner relies on, and this replacement remote puts all of them back in reach. The ST6000F1N is a separate-component AM/FM stereo tuner from Marantz’s classic audio era, offering 60 random preset memories across both AM and FM bands, a fluorescent display with a dimmer function, and analog L/R RCA audio outputs. This replacement works over infrared with no programming, code entry, or pairing required. It has a familiar layout with the everyday controls where you’d expect them, and runs on 2 x AAA batteries.

Why buy this remote

  • Covers all 60 random AM/FM preset memories built into the ST6000F1N.
  • Controls the fluorescent display dimmer and signal strength meter directly.
  • Works with no programming, code entry, or pairing of any kind.
  • Has a familiar layout with the everyday controls where you’d expect them for the ST6000F1N tuner.

Compatible part numbers

Emerson ST6000F1N Remote Specifications
Batteries2 x AAA
Part numberRC6000ST
Device TypeAm/fm Stereo Tuner
CompatibilityEmerson ST6000F1N Am/fm Stereo Tuner
Warranty1 year

Emerson ST6000F1N Am/fm Stereo Tuner Specifications

Type AM/FM Stereo Digital Synthesizer Tuner
FM Frequency Range 87.5 MHz, 108 MHz
AM Frequency Range 522 kHz, 1611 kHz / 530 kHz, 1710 kHz (region dependent)
Presets 60 Station Memory Presets (random preset memory)
Signal-to-Noise Ratio (Mono) 74 dB
Signal-to-Noise Ratio (Stereo) 68 dB (FM)
Frequency Response 20 Hz, 15 kHz (±1.5 dB)
Outputs Analog audio L/R RCA line-out, D-Bus (remote control in/out)
Power Requirements AC 120V, 60 Hz (U.S. model)
Dimensions 17.3 in × 3.5 in × 12.0 in
Weight 7.9 lbs

Frequently asked questions

Will the RC6000ST remote work with my Emerson ST6000F1N AM/FM stereo tuner without any setup?

Yes. The Emerson ST6000F1N remote control is an infrared replacement that responds immediately once batteries are installed, with no programming, code entry, or pairing steps involved.

What functions does this remote control on the ST6000F1N?

This remote covers AM and FM tuning across the full 87.5-108.0 MHz and 520-1710 kHz ranges, recall of all 60 random preset memories, display dimming, and the signal strength meter.

What batteries does the RC6000ST remote require?

It takes 2 x AAA batteries, which are not included.

Is the ST6000F1N a US-market unit?

Yes. The confirmed spec sheet lists the power supply as AC 120V, 60Hz, which is the US model variant. The tuner draws approximately 10W and measures 17.3 x 3.5 x 12.1 inches.

What type of audio output does the ST6000F1N tuner provide?

The ST6000F1N provides analog audio via left and right RCA outputs, making it a separate-component tuner designed to feed a powered amplifier or integrated receiver.

Additional information
Compatible BrandEmerson
Device TypeAm/fm Stereo Tuner
Compatible ModelST6000F1N
Power Source2 x AAA
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Emerson ST6000F1N Am/fm Stereo Tuner Replacement Remote”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

📦 Shipping Information

At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free — the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.


🚚 How much does shipping cost?

Shipping is free on every order — always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.


🏢 Where do you ship from?

Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas — it ships domestically and arrives quickly.


⏱️ When will my order ship?

We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.

Business days are Monday through Friday, excluding national holidays.


🚀 How long will it take to arrive?

Once your order leaves our warehouse, most deliveries arrive within 2–4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.

Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.


⚡ Do you offer faster (expedited) shipping?

We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2–3 business days at no extra cost.

If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.


📬 Which carriers do you use?

Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) — usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.


🌎 Do you ship internationally?

Yes — we ship internationally. International orders typically arrive within 8–14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.

Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.


🏝️ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?

Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2–4 business days.


📮 Do you deliver to PO Boxes?

Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.


🔍 How do I track my order?

As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.


📧 Why does my order say “Completed”?

When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading — “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.


📭 My tracking number isn’t updating — what should I do?

It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend — carriers don’t scan a package at every stop. If there’s no movement for more than 3–4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.


📦 My tracking says “Delivered” but I don’t have it

If the carrier marked your package delivered but it’s not in your hands:

  1. Check around your home — porch, mailbox, side door, garage, or wherever packages usually land.
  2. Ask household members or neighbors in case someone brought it in for you.
  3. Wait 24 hours — packages are sometimes scanned as delivered slightly before they actually arrive.

If it still hasn’t turned up:

  • Contact your local USPS office — they can pull GPS delivery confirmation showing exactly where the package was scanned.
  • Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.

Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.


💔 My remote arrived damaged or doesn’t work

Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.


🏠 What if I entered the wrong address?

If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.


🔀 Why did my order arrive in separate packages?

If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.


❄️ Holiday & weather delays

Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods — and once a package is with the carrier, those delays are outside our control.


✅ Our commitment to you

Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.


📞 Still have questions?

We’re happy to help.

  • Email: cs@usaremotes.com
  • Phone: (720) 204-8889
  • We typically reply within one business day.