Marantz RC002HD Remote Control for HD-AMP1 Amplifier
$23.99
Fits approximately 2 Marantz amplifier models, this RC002HD infrared replacement remote runs on 2 x AAA batteries with zero programming required.
144 in stock
About This Remote
Full amplifier control comes right back the moment you drop batteries in. Built to work with compatible Marantz amplifier models, this infrared replacement remote carries part number RC002HD and covers approximately 2 Marantz models in its fit range. Because it operates over IR, there is no code entry, no pairing step, and no programming menu to navigate – just point it at your amplifier and every function responds as expected.
Power comes from 2 x 1.5V AAA Alkaline batteries, which are straightforward to source and keep the remote going without any fuss.
Why buy this remote
- IR signal fires instantly – zero programming or code entry
- Covers approximately 2 compatible Marantz amplifier models
- Runs on easy-to-find 2 x 1.5V AAA Alkaline batteries
- Part number RC002HD matches your original remote exactly
Marantz HD-AMP1 Amplifier Specifications
| Power Output | 35W + 35W (8 ฮฉ, 20Hz-20kHz), 70W + 70W (4 ฮฉ, 20Hz-20kHz) |
|---|---|
| Frequency Response | 20Hz-50kHz |
| THD | 0.05% (1kHz) |
| Signal-to-Noise Ratio | 105dB |
| DAC Chip | ESS Sabre ES9010K2M |
| Digital Inputs | 2ร Optical, 1ร Coaxial, 1ร USB-B (Rear), 1ร USB-A (Front) |
| USB-B PCM Sample Rates | Up to 384kHz/32-bit |
| DSD Support | Native DSD 2.8/5.6/11.2MHz |
| Analog Inputs | 2ร RCA |
| Analog Outputs | 1ร Subwoofer Pre-out, 1ร Headphone (6.3mm) |
| Technology | Marantz HDAM-SA2 modules |
| Dimensions (W x D x H) | 12.0 ร 13.9 ร 4.2 inches |
| Weight | 12.8 lbs |
Compatible Device Models
This remote is a direct replacement for the Marantz models listed below.
Frequently asked questions
Which Marantz amplifier models does the RC002HD remote fit?
This remote covers approximately 2 Marantz amplifier models. Check your current remote or amplifier model number against RC002HD to confirm a match before ordering.
Does this remote need any programming or code setup to work?
No programming or code entry is needed at all. It uses infrared connectivity and responds to your amplifier the moment batteries are installed.
What batteries does the Marantz RC002HD remote require?
It takes 2 x 1.5V AAA Alkaline batteries, a size that is widely available at any grocery or hardware store.
Is this a genuine Marantz manufacturer remote?
This is a brand-new replacement built to perform identically to the original RC002HD remote. It is not manufacturer-branded, but there is nothing extra to configure – it works just as the original did from the moment batteries go in.
What is the part number for this Marantz amplifier remote?
The part number is RC002HD. Matching this against the label on your existing remote or your amplifier documentation is the most reliable way to confirm compatibility.
| Compatible Brand | Marantz |
|---|---|
| Compatible Part Number | RC002HD |
| Device Type | Amplifier |
| Compatible Model | HD-AMP1, HD-CD1 |
๐ฆ Shipping Information
At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free โ the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.
๐ How much does shipping cost?
Shipping is free on every order โ always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.
๐ข Where do you ship from?
Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas โ it ships domestically and arrives quickly.
โฑ๏ธ When will my order ship?
We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.
Business days are Monday through Friday, excluding national holidays.
๐ How long will it take to arrive?
Once your order leaves our warehouse, most deliveries arrive within 2โ4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.
Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.
โก Do you offer faster (expedited) shipping?
We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2โ3 business days at no extra cost.
If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.
๐ฌ Which carriers do you use?
Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) โ usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.
๐ Do you ship internationally?
Yes โ we ship internationally. International orders typically arrive within 8โ14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.
Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.
๐๏ธ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?
Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2โ4 business days.
๐ฎ Do you deliver to PO Boxes?
Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.
๐ How do I track my order?
As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.
๐ง Why does my order say “Completed”?
When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading โ “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.
๐ญ My tracking number isn’t updating โ what should I do?
It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend โ carriers don’t scan a package at every stop. If there’s no movement for more than 3โ4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.
๐ฆ My tracking says “Delivered” but I don’t have it
If the carrier marked your package delivered but it’s not in your hands:
- Check around your home โ porch, mailbox, side door, garage, or wherever packages usually land.
- Ask household members or neighbors in case someone brought it in for you.
- Wait 24 hours โ packages are sometimes scanned as delivered slightly before they actually arrive.
If it still hasn’t turned up:
- Contact your local USPS office โ they can pull GPS delivery confirmation showing exactly where the package was scanned.
- Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.
Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.
๐ My remote arrived damaged or doesn’t work
Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.
๐ What if I entered the wrong address?
If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.
๐ Why did my order arrive in separate packages?
If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.
โ๏ธ Holiday & weather delays
Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods โ and once a package is with the carrier, those delays are outside our control.
โ Our commitment to you
Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.
๐ Still have questions?
We’re happy to help.
- Email: cs@usaremotes.com
- Phone: (720) 204-8889
- We typically reply within one business day.

Reviews
There are no reviews yet.