Edifier S1000MKII Active Bookshelf Speakers Remote
$39.99
The Edifier S1000MKII remote replacement restores power, volume, input switching, and playback transport control to your speakers, so the listening experience you set up stays fully in your hands from the couch.
53 in stock
About This Remote
Keeping a high-resolution bookshelf speaker system dialed in across multiple inputs takes a capable remote, and the Edifier S1000MKII remote replacement is built for exactly that job. Matched to the S1000MK2 series, The S1000MKII gives you the same command set the speaker was designed to respond to, covering the four core controls the system depends on most.
Power on and off, volume up and down, input and source selection, and full playback transport, these are the controls that make daily use practical, and this replacement puts all of them back in your hand without any setup or pairing. It runs on AAA batteries and communicates via infrared, so you point it at the speaker and it works, exactly as the original did.
The button layout mirrors the original design, so nothing feels unfamiliar after the switch. If the compatible models listed on this page match your speaker, this remote is the right fit.
Why buy this remote
- Correct replacement for the compatible series speakers, no guessing about fit.
- Restores power, volume, input switching, and playback transport from your listening position.
- No programming, pairing, or setup required, works the moment it arrives.
- Matches the original button layout, so the switch feels immediately familiar.
- The right replacement for the models listed on this page, confirmed against the family.
Edifier S1000MK2 Speaker Specifications
| Power Output | RMS 25W×2 (Treble) + 35W×2 (Mid-range and bass) = 120W total |
|---|---|
| Signal-to-Noise Ratio | ≥85 dBA |
| Frequency Response | 45 Hz, 40 kHz |
| Driver Units | 5.5-inch aluminum mid-woofer and 1-inch titanium dome tweeter |
| Inputs | Bluetooth 5.0 (aptX HD), Optical, Coaxial, AUX (RCA), PC input |
| Amplifier Type | Class D with DSP |
| Dimensions | 8.0 × 13.5 × 10.5 inches (W×H×D) per speaker |
| Weight | 18.4 lbs (both speakers) |
Compatible Device Models
This remote works with the Edifier models listed below.
Frequently asked questions
Which speaker models is this remote compatible with?
This replacement remote is confirmed compatible with the Edifier S1000MK2 series. See the full compatibility list in the Compatible Device Models section on this page.
Is this an original Edifier remote?
This is a direct replacement remote for the Edifier S1000MKII. It matches the original button layout and command set, so it operates your speaker exactly as the remote it replaces did, nothing to set up, nothing to learn.
Does this remote need to be programmed or paired before it works?
No setup is needed at all. Point it at your S1000MK2 speaker and it responds immediately, the same way the original did.
Will the buttons match my old remote?
Yes. The layout is designed to mirror the original, so controls like volume, input selection, power, and playback transport are right where you expect them.
How many models does this remote fit?
This remote is compatible with the models listed in the Compatible Device Models section on this page. The confirmed list is a focused set within the S1000MK2 family, so check that section to verify your specific speaker.
| Compatible Brand | Edifier |
|---|---|
| Compatible Part Number | S1000MKII |
| Device Type | Speaker |
📦 Shipping Information
At USA Remotes, we’re committed to getting your replacement remote to you fast, free, and hassle-free — the same way your remote shows up ready to use, with no pairing or programming. Below you’ll find everything you need to know about how we ship, how long it takes, and what to do if anything goes sideways.
🚚 How much does shipping cost?
Shipping is free on every order — always. No minimum purchase, no handling fees, and no surprise charges at checkout. The price you see is the price you pay.
🏢 Where do you ship from?
Every order ships from our U.S. fulfillment center. We’re a U.S.-based company, so your remote never sits in customs or crawls in from overseas — it ships domestically and arrives quickly.
⏱️ When will my order ship?
We move fast. Orders placed before 2:00 PM Mountain Time (MT) on a business day ship the same day. Orders placed after the cutoff, on weekends, or on public holidays ship the next business day.
Business days are Monday through Friday, excluding national holidays.
🚀 How long will it take to arrive?
Once your order leaves our warehouse, most deliveries arrive within 2–4 business days. Paired with same-day processing, the majority of customers have their remote in hand within just a few days of ordering.
Delivery windows are estimates, not guarantees, and can run a little longer during weekends, holidays, peak seasons, or severe weather.
⚡ Do you offer faster (expedited) shipping?
We don’t currently sell a separate paid expedited option, but many orders go out via USPS Priority Mail, which typically reaches most U.S. addresses in 2–3 business days at no extra cost.
If you’re in a time-sensitive situation, email us at cs@usaremotes.com before you order and we’ll let you know what’s possible.
📬 Which carriers do you use?
Because remotes are small and light, the vast majority of orders ship via USPS (United States Postal Service) — usually USPS Ground Advantage or Priority Mail. For larger multi-remote orders we may use UPS or FedEx. The carrier is selected automatically to get your order to you as quickly and safely as possible.
🌎 Do you ship internationally?
Yes — we ship internationally. International orders typically arrive within 8–14 business days, depending on your destination and how long it spends in local customs. Carriers and shipping methods vary from country to country, so your order travels the most efficient route available.
Please note: international shipments may be subject to customs duties, taxes, or import fees charged by the destination country. These are set by your local customs authority and are the responsibility of the recipient.
🏝️ Do you ship to Alaska, Hawaii, U.S. territories, and military addresses?
Yes. We ship to all 50 states, U.S. territories (including Puerto Rico, Guam, and the U.S. Virgin Islands), and APO/FPO/DPO military addresses. Because these rely on USPS, transit times may run a bit longer than the standard 2–4 business days.
📮 Do you deliver to PO Boxes?
Absolutely. Since most orders ship via USPS, PO Box delivery is no problem. On the rare occasion an order ships via UPS or FedEx, we may reach out for a physical street address.
🔍 How do I track my order?
As soon as your order ships, we’ll email you a tracking number. You can also check your status anytime on our Track Your Order page. If you don’t see the email within a day of ordering, check your spam folder or get in touch.
📧 Why does my order say “Completed”?
When your order ships, you’ll get a confirmation email and your order status will change to “Completed.” That wording can be a little misleading — “Completed” simply means your order has shipped and left our warehouse, not that it’s already been delivered. Just use the tracking number in your email to follow it the rest of the way to your door.
📭 My tracking number isn’t updating — what should I do?
It’s normal for tracking to go quiet for a day or two, especially right after a label is created or over a weekend — carriers don’t scan a package at every stop. If there’s no movement for more than 3–4 business days, email us at cs@usaremotes.com and we’ll chase it down for you.
📦 My tracking says “Delivered” but I don’t have it
If the carrier marked your package delivered but it’s not in your hands:
- Check around your home — porch, mailbox, side door, garage, or wherever packages usually land.
- Ask household members or neighbors in case someone brought it in for you.
- Wait 24 hours — packages are sometimes scanned as delivered slightly before they actually arrive.
If it still hasn’t turned up:
- Contact your local USPS office — they can pull GPS delivery confirmation showing exactly where the package was scanned.
- Contact us at cs@usaremotes.com or (720) 204-8889. We’ll help open an investigation and retrieve the GPS scan data if needed.
Insurance: Our shipments include carrier insurance against loss or damage. We’ll guide you through the claim process with the carrier and stay on it until it’s resolved.
💔 My remote arrived damaged or doesn’t work
Every remote is tested and packed with care, but if yours shows up damaged or has a defect, you’re covered by our 1-year warranty and full compatibility guarantee. Just contact us at cs@usaremotes.com with your order number (and a quick photo if it’s physically damaged), and we’ll arrange a replacement or refund right away. Full details are in our Returns & Refunds policy.
🏠 What if I entered the wrong address?
If you spot a mistake in your shipping address, contact us immediately. If your order hasn’t shipped yet, we can fix it. If a package comes back to us as undeliverable (wrong or incomplete address), we’ll reach out to arrange a re-ship to the correct address.
🔀 Why did my order arrive in separate packages?
If you ordered more than one remote, your items may occasionally ship in separate packages or arrive on different days. Each shipment gets its own tracking number, so don’t worry if one lands before the other.
❄️ Holiday & weather delays
Carrier networks slow down during major holidays and severe weather. We still ship on our normal same-day schedule, but transit times may stretch during these periods — and once a package is with the carrier, those delays are outside our control.
✅ Our commitment to you
Your satisfaction is our priority. If anything goes wrong with your shipment, we’ll work directly with USPS or the relevant carrier to make it right and get your remote to you safely. Nobody should be stuck without a way to control their TV, sound bar, or AC.
📞 Still have questions?
We’re happy to help.
- Email: cs@usaremotes.com
- Phone: (720) 204-8889
- We typically reply within one business day.
Reviews
There are no reviews yet.